2-channel soldering and desoldering station WR 2000D

2-channel desoldering station with DSX 80 desoldering iron and WDH 30 safety rest. The WR 2 station has two independent tool-specific channels for automatic tool recognition and activation of the corresponding control parameters. All soldering tools such as soldering irons, soldering baths up to 200 W, desoldering irons up to 80 W or hot air irons up to 100 W can be connected. WELLER Micro-Tools cannot be operated on this station. Simultaneous operation of hot air and desoldering is not possible! Compared to conventional desoldering irons, the X-series desoldering irons have an improved fastening system for the suction nozzle. Instead of the screw thread, the X-series uses an eccentric design as a quick-change system. The suction nozzles are changed quickly and easily with a short rotary movement (approx. 90°). The transition between the heating element and the suction nozzle ensures optimum heat transfer thanks to its conical design. In conjunction with an 80 W heater, these desoldering irons are particularly suitable for soldering joints with high heat requirements. Desoldering iron with external tin collector for desoldering SMD components. Same working position as conventional soldering irons. Electronic temperature control and micro finger switch to activate the fast-response vacuum pump. Various suction nozzles available. - one supply station for most requirements at the repair workstation - high cost savings compared to individual devices - maximum flexibility in your application - unique compatibility - connection of many tools possible (except WX tools) - two independent tool channels with automatic tool recognition guarantee the simultaneous operation of two tools - all tools can be used permanently - desoldering iron with external tin collector - 1 piece WR 2 supply unit - 1 piece DSX 80 desoldering iron - 1 piece WDH 30 safety rest - 1 piece DX 113HM desoldering nozzle, outer/inner Ø 2.5/1.2 mm - 1 piece mains plug - 1 piece operating instructions