2-channel soldering station WX 2021

2-channel supply unit with a WXMP micro soldering iron and a WXMT micro desoldering tweezers, simultaneous operation of two soldering tools is possible. Thanks to its intelligent power management, the WELLER multitool principle enables the connection of tools with different power ratings for every requirement. The parameters of the intelligent WX soldering tools can be set individually and saved in the tool. They can be connected to any WX station and are immediately ready for use, saving an enormous amount of time at the workplace. Active tools are shown on the display and a ring light in the flask indicates the heating cycle. - Cost savings, as only one supply unit is required for several applications - high energy savings, when used as a benchtop controller - reduction in operating costs thanks to increased soldering tip service life - reduction in rework thanks to optimum tool use and the correct working temperature - modern operating concept - robust touchscreen made of antistatic real glass - intuitive operation thanks to rotary clickwheel with finger guide - graphic LC display with backlight - multilingual menu navigation - high functionality - 1 piece WX 2 supply unit - 1 piece WXMP soldering iron - 1 piece WXMT desoldering tweezers - 1 piece WDH 51 safety rest - 1 piece WDH 60 safety rest - 1 piece RTM 013 S. soldering tip, chisel shape 1.3 x 0.4 mm - 1 piece desoldering tip pair RTW 2, chisel shape 0.7 x 0.4 mm 45° - 1 piece mains plug - 1 piece operating instructions