EO-NCF-1003
- For large quantities - ask for quotation
- sales@etronix.se
- BrandEmil Otto
- SKU2991
Description
Article no.: 502991
Description
EO-NCF-1003 is activated on an organic base and halogen-free. It was developed especially for the cleaning of solder nozzles. Due to its activation complex, this nozzle cleaner removes scaling and scraping deposits on solder nozzles of selective soldering machines.
Processing
With light to moderate deposits on the nozzle:
Switch off the selective wave, wet nozzle with EO-NCF-1003, allow to act and switch the wave back on again after approx. 2–3 minutes (possibly also allow the wave to run “lightly” for 2–3 minutes and then bring up to operating performance).
With heavy deposits on the nozzle:
Switch off the selective wave, wet nozzle with EO-NCF-1003, allow to act and switch the wave back on again after approx. 2–3 minutes.
Afterwards, remove the deposits with a brush or similar and then switch the wave back on again. If the deposits have not been sufficiently removed, repeat procedure.
| Application area: | Medium for manual nozzle cleaning of selective soldering machines |
| Appearance/smell: | colourless to light amber-coloured liquid |
| ph-value: | 115–135 mg KOH/g |
| Density 20 °C: | 1,07–0,09 g/cm³ |
| Flash point: | none |
| Substances: | pure water with special additives |
| Durability: | With proper storage between 15°C and 25°C, the shelf life is 12 months |
| Activators: | Halogen-activating-complex |