Folding case Kraftform Kompakt Micro 20 ESD 1

Kraftform Compact Micro Set for precision applications. Suitable for holding bits with 4 mm half-moon drive (Wera Series 9) and bits with 4 mm HIOS drive (Wera Series 21). Power zone with integrated soft zones for transmitting high loosening and tightening torques. Precision zone directly above the blade for the correct rotation angle during adjustment work. Bits for hand- and machine-operated screwdriving. Lightning-fast bit fixation: simply slide the bit into the holder, automatic locking, secure fit. To change the bit, simply slide the sleeve forward and remove the bit. Free-spinning drive sleeve for easy guidance of the tool during the screwdriving process. - Bit hand holder suitable for holding bits with 4 mm Halfmoon or HIOS drive - Hand holder with roll-off protection, rotating cap, and quick-change chuck - Handle made of material with electrical surface resistance <10? ohms - Handle/interchangeable blade system for lightning-fast blade replacement - Kraftform Micro handle with rotating cap for lightning-fast twisting; no more time-consuming re-gripping required - Bits for hand- and machine-operated fastening applications - Manufactured in accordance with DIN EN 61340-5-1 - In a practical fold-out pouch - 1 Kraftform Micro ESD bit holder - 1 set of Torx bits, sizes TX 1, TX 2, TX 3, TX 4, TX 5, TX 6 x 44 mm - 1 set of Allen bits, sizes 1.5, 2 x 44 mm - 1 Torx Plus bit, sizes 1 IPR x 44 mm - 1 Phillips bit, sizes PH 00, PH 0, PH 1 x 44 mm - 1 Torx Plus bit, sizes 1 IP, 2 IP, 3 IP, 4 IP x 44 mm - 1 flat-head screwdriver bit, sizes 0.23 x 1.5, 0.40 x 2, 0.50 x 3 x 44 mm