ShockWatch L-30, green,100 g / 50 ms

The ShockWatch L30 green 100g / 50 ms is used for transport monitoring of packages in the very low weight range up to approx. 5 kg with a very small package volume. The typical maximum package volume (L x W x H) for the ShockWatch L30 is a maximum of 0.135 m3. This corresponds to a box size of approx. 60 x 60 x 40 cm.

Please note that, for physical reasons, the ShockWatch L30 may no longer function properly and as expected above the stated weight limit of approx. 5 kg. The ShockWatch L35 with 75g or the ShockWatch L47 with 50g offer an alternative product for weights of more than 5 kg. You can find more information on the corresponding product pages or call us for advice.

• Ophthalmic optical devices and materials
• Medical/electronic devices
• Measuring, testing and automation technology
• Handheld computers
• Special glass products
• Control systems
• Dental products
• Room air and filter technology
• Device technology for solar energy
• Semiconductor and clean room technology
• Microelectronic products

Application and selection of the right ShockWatch indicator

Choosing the right indicator: To ensure that the ShockWatch indicators do not trigger too early or too late, it is important to select the right indicator for the transportation monitoring of your package. The following table offers you a differentiated selection option to suit your individual requirements

The starting point for selecting the right ShockWatch indicator is the size of the package in cubic meters (L x W x H) and the total weight (including packaging) of your package. Select the weight range in the left-hand column and the volume range in the top line. Extend both fields with an "imaginary line" and read off the corresponding sensitivity value. The determined color field represents the respective g-value. Small delivery note sticker: Each Shockwatch label comes with a small delivery note sticker, which is included in the packaging of the Shockwatch indicators. Simply stick it on your delivery bill to provide an additional reference for checking the ShockWatch label on the package when the goods are accepted by the carrier or end customer.

General function of ShockWatch indicators

All ShockWatch labels offer a simple and very effective way of avoiding or reducing transport damage. A color change of the ShockWatch indicator from white to red clearly and immediately indicates to everyone that the handling instructions have not been observed and that there is a possible transport damage caused by a strong impact. The use of ShockWatch indicators is a preventive measure to avoid improper handling during transportation. On the one hand by informing the forwarder before transportation and on the other hand by visibility on the package during transportation, which informs that the goods must be handled with appropriate care. You will find corresponding information letters in our "Procedural instructions" in the download area.

• Controllable compliance with your handling instructions from production to the end customer
• Not interchangeable due to individual serial number
• Improved basis for selecting the carrier and transport route
• Identification of time, place and person responsible in the event of transport damage
• Reduction of transport damage
• Timely detection of hidden transport damage
• Decreasing complaint rate and therefore lower costs
• Improved product yield
• Transport monitoring of the supply chain