Victron Orion-Tr 12 / 24-15A isolated DC-DC converter

The Victron DCDC converter 12v/24v 15A delivers a smooth and accurate voltage. At an input voltage between 10 - 17V, the converter nominally outputs 12.2V. The output voltage can be adjusted between 10 - 15V. The output voltage will remain stable within the specified range of input voltage (buck-boost function) if it is set at nominal value or lower than nominal. If the output voltage is set higher than the nominal value by a certain percentage, the minimum input voltage at which the output voltage remains stable (does not decrease) is increased by the same percentage Remote On/Off The remote switch removes the need for a high current switch in the input wiring. The remote switch can be controlled by a low-current switch or by the motor on/off switch. Adjustable output voltage: can also be used as a battery charger For example, to charge a 12-volt starter battery or an additional battery in a system that otherwise uses 24V. All models are short-circuit proof and can be connected in parallel to increase the output current. An unlimited number of units can be connected in parallel. Protected against high temperatures The output current decreases at high ambient temperatures. IP43 protection When the unit is installed with the screw terminals downwards. Screw terminals No special tools are required to install the unit. Input fuse (non-replaceable) Only on models with 12V and 24V input)